Exterior House Details

We immediately removed the exterior iron doors, replaced the light fixtures, and removed the shutters. I’m a little weird about shutters… I always like them to look real, even if they’re not. Which means if you were to pretend to close them, I think they should look like they would actually serve their purpose and cover the window. {I know, I’m nuts} Ours did not, and they also drew your attention to the black bricks scattered throughout the brick pattern. After we did these minor little changes we waited to paint. We waited two years, which I know isn’t a really long time, but for me, it seemed like we’d never paint. Our house had 3 different types of brick on it and every time I walked outside I could hear it crying for paint.

The doors pictured above are our front doors, the door pictured below is our side door.

We initially replaced the light fixtures {picture above are the original light fixtures} and then waited to paint. If you look closely you can see that the brick near the front doors is a different brick from the side door… which is a much different brick from the garage. We also cut back the Azaelas that were taller than the roof. 

It took me 7 quarts of paint to finally decide on colors. Thank goodness for sample quarts that are only $5 {Sherwin Williams}.

After a few consultations with Erika and the help of both sister-in-laws and my kind neighbor who came by to examine my handiwork on the garage, I finally decided on Clarksville Gray {Benjamin Moore HC 102} for the body and Texas Leather {Benjamin Moore AC-3} for the trim. For the doors, I asked the paint shop to mix Texas Leather with double the formula + black, does that make sense? I wanted it to look like a really rich Texas Leather but be obvious that it’s NOT actually Texas Leather.

We did have painters paint the house. We really wish we could have done it ourselves but the quote we got was almost too good to be true. We also couldn’t figure out logistically how to do it ourselves… we’re finally getting to the point in our lives where we realize the benefit of paying someone to help you… it’s a good place to be… but comes with a price.

They primed and sealed the brick first with a product called Loxon {a masonry sealer} by Sherwin Williams. We used all Sherwin Williams paint in Benjamin Moore colors.

Out front, as I mentioned before, we removed the horizontal handrailing and used my sister-in-law’s spare bricks to create a step. Do you remember when I ran over our brick column? Well eventually {after it stayed like that for TOO long} a brick mason stopped by to see if he could replace it or repair it. We ended up getting rid of the columns all together {and adding lights to the garage instead} and he ended up adding this step for us one Saturday morning.

We also changed out the doors, door hardware, and lights {the lights we bought after buying the house were moved to the garage}.

The doors are by Barnett Millworks in their Mobile Bay Series, they come in either Mahogany or Fir {paint grade}, we obviously went for the paint grade. I believe the company is to the trade only, we ordered our doors through Chapman Building Systems.

Please excuse the landscaping, or lackthereof. The door hardware and lights came from Lowe’s. The lights are really substantial {over 30″ tall} and the price was really good!! I can’t find the actual lights that we have on their website, but they are basically these but in the next size up {with 4-lights instead of just 3}. The door hardware is by Kwikset and it too came from Lowe’s. The urns are from Lowe’s {it’s right around the corner & dangerously convenient, can you tell?} and the ferns are Kimberly Queens and from a local nursery. 

My sister-in-law has added a quick tutorial on the ghosts on her blog if you were inquiring. We put up the light fixtures on the side door entrance shortly after we moved in, I think they came from Lowe’s too. We put the same pair on the front of the house when we moved in and ended up moving them to the garage when the electricians came to install the new lights and canned lights at the front entrance. They’re on this great programable light switch that I found, it’s very convenient. The garage was a late addition to the house {I think in ’85} and it’s on a separate breaker… I wasn’t planning on walking out to the garage every night to turn the lights on so the programmable switch was worth every penny! 

Several of you asked about how I feel about having windows on my doors. As you can see there is a wall almost directly behind the side entrance with the flag print, so unless they have their face plastered to the door they really can’t see in. As for the front doors, if they walk up to them and ring the bell, then yes, they obviously can see in. However, our house sits back from the road a good bit and you really can’t see in unless you are parked out front and really look hard and if you do that I might call the police. 🙂 Most of our guests use our side door and usually I answer so there’s no need to really hide. If you like to hide or if your house sits on a busy street you may not like these doors.

To ensure that the front steps aren’t slippery when wet {Jon Bon} we used a sifter and white sand to evenly spread sand during the last coat of paint… it worked great and they have a nice rough surface so no one falls and hurts themselves.

Did  I miss anything?

We’re in the process of getting ready for a BIG surprise for the girls… more to come on that soon!